Arlo Base Station Setup: A Complete Guide to Connectivity and Troubleshooting

In this interconnected world, you can’t compromise with your safety and security. Similarly, Arlo provides efficient yet robust security devices to keep your indoor or outdoor environment safer than ever. Many of the Arlo camera systems require a central hub, known as the Arlo Base Station, for centralized management. Therefore, learning the Arlo base station setup is highly necessary.

Since this guide will cover the initial setup process in detail, it will then proceed to give some common troubleshooting steps to ensure optimal camera performance. Additionally, you will explore How To Reset Arlo Base Station through this guide. So, understand these key processes to ensure ultimate peace of mind.

Getting Started with Arlo Base Station Setup

The first and probably most critical step in establishing a stable security network is setting up your Arlo Base Station. Your Base Station is the wireless center point to your cameras, and therefore, it must be connected to a stable internet connection. Thus, this section will take you through the quick instructions to complete the initial Arlo Base Station Setup:

First, take your Arlo Base Station out of the box and, what is more, out of its accessories.
Then, plug in your router or modem to the Base Station through the Ethernet cable that comes with it.
Next, insert the power adapter of the Base Station into a mains socket.
Then wait till the LED lights stabilize. Most models will use the LED lights to show that the power has come on successfully, and there is a connection to the internet using a solid green or blue light.

After that, you need to download the Arlo Secure App and, through in-app guidelines, add the Base Station to your account.

Using the Arlo Secure App For Base Station Setup

Indeed, physical connectivity and initial setup are important to make the most of your device

Initially, unbox your device and power it on by pressing the ON/OFF button.
Next, check the power LED indicator on your base station.
Now, sync your base station with your specific device.
Then, launch the Arlo Secure app on your device.
Further, log in to your Arlo account and visit the app dashboard.
Next, tap “Add New Device” and select the “Base Station”.
After that, connect your base station to the wifi network using the Ethernet cable.
Make sure you connect it to wifi before powering it on.
Now, use the included AC power adapter to plug it into an electrical outlet.
Wait for the LED indicators on your base station, and when the power LED turns solid green, your device is ready to use.
Now, you can configure further settings using the Arlo Secure app.
Finally, the Arlo Base Station Setup is finished.

How to Sync Arlo Camera With Base Station?

Indeed, you can sync the Arlo security camera to its Base Station manually with easy steps. If you want to achieve a good connection, it is critical to sync your Arlo camera with the base station to allow the seamless passage of video and manage the camera.

Moreover, it allows you to control and monitor your live security camera feeds using the Arlo app, thus improving their performance and security. If you are interested in learning how to sync arlo cameras with base station fast and effectively to ensure that your home security system is operational and that it runs without any trouble

Initially, remove the Arlo camera from its housing.
Next, find the “Sync” button on your camera.
Then, press this button and you will see the LED blinking on your camera.
Now, wait for a few seconds till the Arlo camera connects to the Arlo SmartHub.
Meanwhile, you can see a rapidly blinking LED on your Arlo camera.
Further, open the Arlo Secure app and view the live streaming to verify if the camera is synced.
Lastly, insert the camera into its housing until you hear a click.

Troubleshooting a Common Foe: Arlo Bastion No Internet Access Problem

When your Arlo Base Station No Internet Connection problem happens, and your cameras go offline, that can be very frustrating. This problem, commonly mislabeled by the user as an Arlo Bastion No Internet Access Problem, is particularly problematic with an amber or flashing amber light on your device.

Consequently, the objective is to identify the root cause and rectify it effectively. Now we shall look at some of the most common situations leading to this connectivity failure and their resolution. Here we go:

The first thing to do is power-cycle your entire network. The first step requires you to turn off your modem and router, and then the Arlo Base Station. Then, after 30 seconds, reconnect them, leaving the modem, then the router, and then the Base Station.
Besides, inspect the physical connections if you face the Arlo Bastion No Internet Access Problem. Make sure that the Ethernet device is firmly inserted into the Base Station and your router. Therefore, use another Ethernet cable altogether as part of eliminating a bad cable.
Besides, check your internet connection. Connect another device, such as a laptop, directly into the router via an Ethernet cable to ensure that you have a stable internet connection.
In addition, check the settings in your router. Note that your router's DHCP (Dynamic Host Configuration Protocol) should be activated, without which the BaseStation will not be able to obtain an IP address.
At last, you just opt for factory resetting your Arlo base station to fix the connectivity issues.

What to Do If the Arlo Camera Won't Sync With Base Station?

If you want to get your camera running up and running effortlessly, you must sync your security camera with its SmartHub or BaseStation. If your Arlo camera not syncing with base station, it may prevent you from accessing and monitoring your home security. This usually occurs due to power issues, incorrect placement of the devices, failed sync, etc. To fix these issues, try these troubleshooting tips:

First, make sure that the battery of the camera is sufficiently charged.
In case the battery is running low, charge it up fully, because it is likely to fail to sync with low power.
Second, make sure that the camera is in the suggested wireless range of the base station.
Next, ensure there are no metal, thick walls, or other electronics that may be causing wireless interference, and move the camera where needed.
Then, after that, the only thing you do is to press the Sync button on the base station, and then press the Sync button on the camera.
In addition, verify the Internet and Power LEDs on the base station to verify that the base station is connected and functioning properly.
Alternatively, attempt to reboot the base station: Unplug the base station and then plug it in again after 30 seconds.
Lastly, when all has been tried and Arlo Camera Won't Sync With Base Station, you can delete the camera out of your account using the app or do a factory reset on your camera.

A Crucial Tool: How To Reset Arlo Base Station

Indeed, resetting your device is essential to give a fresh start to your device. Additionally, a factory reset will erase the root cause of any connectivity bugs and software glitches by deleting all your settings. The reset should therefore be done when all other troubleshooting steps have been exhausted. Here are the quick steps for How To Reset Arlo Base Station using the physical button:

First of all, make sure your device is powered on.
Afterwards, find the reset button on the rear side of the Base Station.
As a result, press and hold the reset button for approximately 10 seconds.
You can use a paperclip or any other small pointed object to press the reset knob.
Wait for a while till the LEDs on the front of the Base Station start flashing amber.
Then the Base Station will restart. The LEDs will go solid amber and eventually a green colour once the job is done.

However, some users often encounter the Arlo Base Station No Internet Connection After Reset issue. To learn more, refer to the next section.

What to Do When Your Arlo Base Station Has No Internet Connection After Reset?

There may be cases where you still have an Arlo Base Station No Internet Connection After a Reset, even after you have done a factory reset. This may be even alarming in that a reset is considered a resolute resort. However, there are certain actions that you can undertake in your bid to deal with this nagging problem. In case the initial solutions could not work, the ensuing troubleshooting steps must be taken into consideration.

To start with, you need to turn off your router firewall settings or any VPNs you have installed on your computer because they have the tendency to block you, connecting to the Arlo servers.
Afterwards, make sure that you obtain the required ports (443 and 80) on your router, as these play a very crucial role in passing communication via Arlo.
Last but not least, in case the issue continues, it is likely to be an issue with a more complicated network routing around it. It is important to get in touch with your internet service provider (ISP) to seek more help.

In short, this Arlo Base Station Setup guide is a lot more than setting up the station initially. From initial setup to common troubleshooting, this guide also sheds light on the common issues. If you are still seeking assistance, let us know in the chat box!